Outdoor Hockey Goal Posts

Outdoor Hockey Goal Posts

As supplied to England Hockey.

All hockey goals must be anchored correctly to conform to BS EN 750.
Top Tip from Grimshaw Sports If choosing a hockey goal for a sand or water based artificial surface then aluminium is the preferred option as it will withstand deterioration from abrasion and corrosion.

Socketed Steel Hockey Posts

Ref: HA-HOC-012

Socketed Steel Hockey Posts
• Uprights and crossbars manufactured from 50mm square x 2.0mm thick steel
• Uprights and crossbars all polyester powder coated white
• Complete with 12 synthetic arrow net hooks per set for attaching the net to the crossbar
• Four 460mm deep steel sockets with 52mm square internal face
• Sockets are designed to allow uprights to sit 236mm deep into socket
• Net supports and backboards not supplied - please see below
• Conforms to BS-EN-750

Nets not included. Recommended net HA-HOC-001

62.00 kg per set

Net supports and backboards not supplied - please see below.
Recommended net HA-HOC-001.
S.S.P: £361
(Excl VAT at 20%)

Our Price: £290.00
(Excluding VAT at 20%)

Add Hockey Net
Wooden Backboards
Net Support Tubes
Drop In Socket Lids
Spare Sockets

Quantity:    
£71

Freestanding Steel Hockey Goal with Practice Backboards

Ref: HA-HOC-014

Freestanding Steel Hockey Goal with Practice Backboards
• Uprights and crossbars manufactured from 50mm square x 2.0mm thick steel
• Uprights and crossbars all polyester powder coated white
• Net supports manufactured from 25.4mm diameter x 2.0mm thick steel
• Board support rails for added strength
• Complete with 12 synthetic arrow net hooks per set for attaching the net to the crossbar
• Conforms to BS-EN-750
• Complete with white practice backboards
• Backboards 152mm x 25mm thick

All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x HA-ANC-005 Counterbalance weights are required per goal. See below for anchoring options.

93.00 kg per set

Set of two goals.

Net not included. Recommended net HA-HOC-001.
Anchors are required.
S.S.P: £716
(Excl VAT at 20%)

Our Price: £584.81
(Excluding VAT at 20%)

Add Hockey Net

Quantity:    
£132

Freestanding Steel Hockey Goal with Regulation Backboards

Ref: HA-HOC-015

Freestanding Steel Hockey Goal with Regulation Backboards
• Uprights and crossbars manufactured from 50mm square x 2.0mm thick steel
• Uprights and crossbars all polyester powder coated white
• Net supports manufactured from 25.4mm diameter x 2.0mm thick steel
• Board support rails for added strength
• Complete with 12 synthetic arrow net hooks per set for attaching the net to the crossbar
• Conforms to BS-EN-750
• Complete with green wooden regulation backboards
• Backboards 460mm x 18mm thick

All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x HA-ANC-005 Counterbalance weights are required per goal. See below for anchoring options.


156.00 kg per set

Set of two goals.

Net not included. Recommended net HA-HOC-001.
Anchors are required.
S.S.P: £1101
(Excl VAT at 20%)

Our Price: £929.80
(Excluding VAT at 20%)

Add Hockey Net

Quantity:    
£171

Freestanding Steel Premier Hockey Goal with Wood Backboards

Ref: HA-HOC-016

Freestanding Steel Premier Hockey Goal with Wood Backboards
• Manufactured from 50mm square x 2mm thick steel
• Uprights and crossbars all polyester powder coated white
• Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position
• Complete with net supports, lifting handles and top backbar manufactured from 25mm square pre-galvanised steel
• Lifting handles designed for use with the flip-over wheel kit
• Complete with green wooden regulation backboards
• Backboards 460mm x 18mm thick
• Conforms to BS-EN-750

All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x ANC-005 Counterbalance weights are required per goal. See below for anchoring options.

Set of two.

188.00 kg per set

Recommended hockey net HA-HOC-003, can be used with flip-over wheel kit HA-HOC-140.
Anchors are required.
S.S.P: £1165
(Excl VAT at 20%)

Our Price: £945.45
(Excluding VAT at 20%)

Add Hockey Net
Add Flip Over Wheel Kit

Quantity:    
£219

Freestanding Steel Premier Hockey Goal with PVC Backboards

Ref: HA-HOC-017

Freestanding Steel Premier Hockey Goal with PVC Backboards
• Manufactured from 50mm square x 2mm thick steel
• Uprights and crossbars all polyester powder coated white
• Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position
• Complete with net supports, lifting handles and top backbar manufactured from 25mm square pre-galvanised steel
• Lifting handles designed for use with the flip-over wheel kit
• Complete with 460mm x 18mm PVC side & backboards
• Reconstituted PVC backboards are extremely durable against high impact hockey balls
• Extremely weather resistant and will not crack or warp when exposed to the elements
• Conforms to BS-EN-750

All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x ANC-005 Counterbalance weights are required per goal. See below for anchoring options.

Set of two.

211.00 kg per set

Recommended hockey net HA-HOC-003, can be used with flip-over wheel kit HA-HOC-140.
Anchors are required.
S.S.P: £1367
(Excl VAT at 20%)

Our Price: £1,126.87
(Excluding VAT at 20%)

Add Hockey Net
Add Flip Over Wheel Kit

Quantity:    
£240

Outdoor Folding Wheelaway Hockey Goals

Ref: HA-HOC-030

Outdoor Folding Wheelaway Hockey Goals
Folding hockey goals with integral wheels. Simply lift out the backboard, engage the wheels and the goal is ready to be moved by two adults.

• Manufactured from 50mm square x 2mm thick steel
• Uprights and crossbars all polyester powder coated white
• Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position
• Heavy duty hinged folding side frame manufactured from 25.4mm sq. steel and polyester powder coated green
• Large wheels and robust handle ensure goals can be transported safely by two adults
• 460mm x 18mm thick green regulation wooden backboards
• Conforms to BS-EN-750

Set of two.

213.00 kg per set

Net not included. Recommended hockey net HA-H0C-003.
Anchors are required.
S.S.P: £1376
(Excl VAT at 20%)

Our Price: £1,130.00
(Excluding VAT at 20%)

Add Hockey Net

Quantity:    
£246

Heavy Duty Aluminium Hockey Goal

Ref: HA-HOC-104

Heavy Duty Aluminium Hockey Goal
An excellent option specifically suited to both water and sand based synthetic surfaces. The goals can be easily moved using our cellular rubber wheel kit preventing damage to the surface.

All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x HA-ANC-005 Counterbalance weights are required per goal.

• Regulation size 3.66m wide x 2.14m high with a 1.22m runback
• Manufactured from 50.8mm x 65mm x 2.5mm thick reinforced aluminium
• Uprights, crossbar and side frames all polyester powder coated white
• Zinc plated corner joints made from 8mm thick steel plate
• Back supports and top backbar manufactured from 32mm diameter x 2.6mm thick aluminium
• 460mm high reinforced aluminium backboard panels with green noise-absorbing carpet on all inside faces
• Side frames complete with fully welded back tubes and lifting handles for added strength
• Stainless steel bolts throughout
• Uprights and crossbars feature stainless steel retaining rods to ensure net is held firmly in position
• Conforms to BS-EN-750

Set of two goals.

190.00 kg per set

Nets not included. Recommended net HA-HOC-003.
S.S.P: £2260
(Excl VAT at 20%)

Our Price: £1,750.01
(Excluding VAT at 20%)

Add Hockey Net

Quantity:    
£510

Integral Weighted Hockey Goals

Ref: HA-HOC-150

Integral Weighted Hockey Goals
Harrod UK are Sole Suppliers of Hockey Goals, Nets and Dugouts for the London 2012 Olympic Games.

Harrod UK Integral Weighted Hockey Goals were the official goals at the London Cup 2011, the Samsung FIH Champions Trophy 2010 and the Euro Hockey Nations Championship 2007.

Harrod UK's uniquely designed range of integral weighted goals have been developed to meet BSEN standards for freestanding goals. The goals are safe to use at all times, eliminating the users responsibility of attaching seperate anchorage. The unique roller system allows easy manoeuvrability on all synthetic surfaces.

• 3.66m x 2.14m x 1.3m runback
• Complies with BS EN 750 safety standards without the need for separate anchorage
• Uprights & crossbars made from 75mm x 50mm reinforced aluminium
• Uprights & crossbars have an extra heavy duty 7mm thick reinforced front wall to prevent ball damage and are polyester powder coated white
• Net supports and backboards are polyester powder coated red
• Specially designed 50.8mm diameter back tubes allow the net to hang freely eliminating ball rebound
• Backbar consisting of six individual galvanised steel rollers
• Integral net retaining system holds the net firmly in place without the use of net clips
• 460mm high reinforced aluminium backboard panels with red noise-absorbing carpet on all inside faces
• Stainless steel bolts throughout
• Conforms to BS-EN-750

Set of two.

290.00 kg per set

Set of two goals, requires HA-HOC-155 net.
S.S.P: £3260
(Excl VAT at 20%)

Our Price: £2,532.44
(Excluding VAT at 20%)

Add Hockey Net

Quantity:    
£728

Fence Folding Hockey Goal 2.1m x 2.5m Projection

Ref: HA-HOC-130

Fence Folding Hockey Goal 2.1m x 2.5m Projection
Ideal for synthetic surfaces, unique pivot joints allow the hockey goal to fold back against the fence without detaching the backboards.

• 3.66m x 2.14m
• Uprights and crossbars made from 75mm x 50mm reinforced aluminium
• Uprights and crossbars have an extra heavy duty 7mm thick reinforced all to prevent ball damage and are polyester powder coated white
• Net supports and backboards polyester powder coated green

• 460mm high reinforced aluminium backboard panels with green noise-absorbing carpet on all inside faces
• Stainless steel bolts throughout
• Support posts made from 100mm x 100mm galvanised steel and polyester powder coated green
• Adjustable telescoping side bars and vertical support bar made from 60mm x 60mm galvanised steel and polyester powder coated green
• 460mm deep sockets with a 103mm square internal measurement
• Complete with locking device so goal is secure whilst in play and when folded
• Conforms to BS-EN-750

2.1m to 2.5m Projection

Set of two.

353.00 kg per set

Nets not included. Required net HA-HOC-135
S.S.P: £4339
(Excl VAT at 20%)

Our Price: £3,300.00
(Excluding VAT at 20%)


Quantity:    
£1039

Fence Folding Hockey Goal 2.5m x 3.3m Projection

Ref: HA-HOC-131

Fence Folding Hockey Goal 2.5m x 3.3m Projection
Ideal for synthetic surfaces, unique pivot joints allow the hockey goal to fold back against the fence without detaching the backboards.

• 3.66m x 2.14m
• Uprights and crossbars made from 75mm x 50mm reinforced aluminium
• Uprights and crossbars have an extra heavy duty 7mm thick reinforced all to prevent ball damage and are polyester powder coated white
• Net supports and backboards polyester powder coated green

• 460mm high reinforced aluminium backboard panels with green noise-absorbing carpet on all inside faces
• Stainless steel bolts throughout
• Support posts made from 100mm x 100mm galvanised steel and polyester powder coated green
• Adjustable telescoping side bars and vertical support bar made from 60mm x 60mm galvanised steel and polyester powder coated green
• 460mm deep sockets with a 103mm square internal measurement
• Complete with locking device so goal is secure whilst in play and when folded
• Conforms to BS-EN-750

2.5m to 3.3m Projection

Set of two.

356.00 kg per set

Nets not included. Required net HA-HOC-135.
S.S.P: £4387
(Excl VAT at 20%)

Our Price: £3,370.00
(Excluding VAT at 20%)


Quantity:    
£1017

Fence Folding Hockey Goal 3.3m x 4.8m Projection

Ref: HA-HOC-132

Fence Folding Hockey Goal 3.3m x 4.8m Projection
Ideal for synthetic surfaces, unique pivot joints allow the hockey goal to fold back against the fence without detaching the backboards.

• 3.66m x 2.14m
• Uprights and crossbars made from 75mm x 50mm reinforced aluminium
• Uprights and crossbars have an extra heavy duty 7mm thick reinforced all to prevent ball damage and are polyester powder coated white
• Net supports and backboards polyester powder coated green

• 460mm high reinforced aluminium backboard panels with green noise-absorbing carpet on all inside faces
• Stainless steel bolts throughout
• Support posts made from 100mm x 100mm galvanised steel and polyester powder coated green
• Adjustable telescoping side bars and vertical support bar made from 60mm x 60mm galvanised steel and polyester powder coated green
• 460mm deep sockets with a 103mm square internal measurement
• Complete with locking device so goal is secure whilst in play and when folded
• Conforms to BS-EN-750

3.3m x 4.8m Projection

Set of two.

365.00 kg per set

Nets not included. Required net HA-HOC-135
S.S.P: £4587
(Excl VAT at 20%)

Our Price: £3,470.00
(Excluding VAT at 20%)


Quantity:    
£1117

Hockey Goal Anchoring Options

Hockey Goal Anchoring Options


These options are available for all freestanding hockey goals:
Counterbalance Weights - 20 required per set of goals
Heavy Duty Grass Anchor - 4 required per set of goals
Flip-up Style Anchor Socket - 4 required per set of goals
Fence Type Anchor - 4 required per set of goals

All hockey goals must be anchored correctly to conform to BSEN 750

To order Goal Anchors please look in Hockey Accessories Section.


Mini Hockey Goal 450mm x 600mm

Ref: HA-HOC-031

Mini Hockey Goal 450mm x 600mm
Mini Hoc Goals

• 450mm high x 600mm wide
• Manufactured from 22mm diameter x 1.6mm thick steel
• Polyester powder coated yellow
• Folding side frames and a detachable backbar for easy storage
• Complete with nets

8.40 kg per pair
S.S.P: £132
(Excl VAT at 20%)

Our Price: £110.00
(Excluding VAT at 20%)


Quantity:    
£22

Mini Hockey Goal 600mm x 900mm

Ref: HA-HOC-034

Mini Hockey Goal 600mm x 900mm
Junior Mini Hoc Goals

• 600mm high x 900mm wide
• Manufactured from 22mm diameter x 1.6mm thick steel
• Polyester powder coated yellow
• Folding side frames and a detachable backbar for easy storage
• Complete with nets

13.00 kg per pair
S.S.P: £139
(Excl VAT at 20%)

Our Price: £115.00
(Excluding VAT at 20%)


Quantity:    
£24

Mini Hockey Goal 1000mm x 1400mm

Ref: HA-HOC-035

Mini Hockey Goal 1000mm x 1400mm
Senior Mini Hoc Goals

• 1000mm high x 1400mm wide
• Manufactured from 22mm diameter x 1.6mm thick steel
• Polyester powder coated yellow
• Folding side frames and a detachable backbar for easy storage
• Complete with nets

18.00 kg per pair
S.S.P: £160
(Excl VAT at 20%)

Our Price: £130.00
(Excluding VAT at 20%)


Quantity:    
£30